PVC gully kit 40 sites

  • Model: PVC1055A
  • Shipping Weight: 5.9KGs
  • 100 Units in Stock

 Ask a Question 


Add to Cart:

PVC gully kit PVC1055A


 PVC gully:
  Material: PVC
  Net weight: 1140±10 grams
  Size: 75x75x1055mm
  Thickness: 2mm
    Top cover:
      Cup hole size =48mm       Net cup spacing =100mm,
      Water inlet dia. =12.7mm
    Bottom trunk:
       Water outlet dia. =12.7mm

 End cap:
  Material: Silicon white   Net weight 68±1 grams
  Size: 77x77x2.5mm

 Net cup:
  Material: PP black
  Top diameter 50mm (1.7")
  Neck diameter 45.8mm
  Bottom diameter 39mm
  Height 50mm
  Net weight 5.5 grams

 Straight thru Fitting (S_8.0_M12_8.0):
  Material: PP
  Net weight 3.0 grams
   Middle M12 coarse thread (M12, Pitch 1.75, Height 8mm)
   The ends (inner dia. 5.8mm, outer dia.  8.3min/9.3max)
   Good for hose PVC 9*12mm or Silicon 10*14mm
   Includes M12 PP nut *1
   Includes M12 rubber O-ring *1

 Straight thru nozzle (S_12.0_M12):
  Material: PP
  Net weight 9 grams
  nbsp;One end M12 coarse thread (M12, Pitch 1.75, Height 8mm)
   The other end 12mm (inner dia. 9.7mm, outer dia. 11.3mm)
   Good for hose PVC 12*16mm or Silicon 10*14mm.
   Includes M12 PP nut *1
   Includes M10 rubber O-ring *1

Shipping list:
   PVC gully x 4
   End cap x 8
   Net cup x 40
   S_8.0_M12_8.0 x 8
   S_12.0_M12 x 8
   T_12.0  x 3
   L_12.0  x1
   Nylon cable tie 400mm x 8
   Net weight 5.35KG

Shipping carrier:
    Express mail service (EMS) by Chunghwa post.

eBay listing:

This product was added to our catalog on Thursday 18 February, 2016.

Your IP Address is:
Copyright © 2022 BuyOBD Taipei. Powered by Zen Cart