ELM327 J1939 RS232 24V 1Mbps

  • Model: ELM327-J1939-3232-V11
  • Shipping Weight: 0.2Kgs
  • 50 Units in Stock


Add to Cart:

OBD2 scan tool for heavy vehicle

    Switching Power 36V 2A
    Low standby current
    High efficiency
    Design for permanent installation.

    Over voltage protection 32V
    Over current protection 2A

MCU: ELM327 V1.4B
    Baud default = 38400
RS232 chip:
    Baud max 1000Kbps (25 degree C)
    ISO 15765-4 (CAN H/L)
    SAE J1939
    ISO 9141-2 (KWP2000, Optional)
    ISO 14230-4 (KWP2000, Optional)
    SAE J1850 (Not included)
    SAE J1578 (Not supported)
    SAE J1708 (J1587/J1922 Not supported)
    SAE J2534 (Not supported)
Input: OBDII -B male 16pin gold
Output: RS232 D-sub 9pin
    Cable length: 180CM (GND, TX, RX)
    Material: FR4 4 layer lead free
    Output pin: 5V/GND/TX/RX
    Pin header Pitch 2.54mm
    BLE 4.2 module design reserved
    Brightness is lowered for power saving.
    Red (power, off when sleep)
    Green (RS232 RX)
    Orange (RS232 TX)
    Green (OBD2 RX)
    Orange (OBD2 TX)
AT command:
    AT SP A (Set Protocol to J1939)
    AT SP 0 (Set Protocol to auto)
Input Voltage: DCV36 MAX
Input current:
Standby current:
Working temperature: -40°C to +85°C
Manufacture: Made in Taiwan
Warrenty: 1 year

This product was added to our catalog on Thursday 21 June, 2018.

Your IP Address is:
Copyright © 2019 BuyOBD Taipei. Powered by Zen Cart